CEH: 10 Hacking Tools For Hackers

There are a lot of hacking tools available over the internet but mostly we need some of them. In this blog you'll learn about hacking tools which are typically used in the world of hacking by penetration testers.

SmartWhois

SmartWhois is an information-gathering program that allows you to find all available information about an IP address, hostname, or domain, including country, state or province, city, name of the network provider, administrator, and technical support contact information. SmartWhois is a graphical version of the basic Whois program.

SocksChain

SocksChain is a tool that gives a hacker the ability to attack through a chain of proxy servers. The main purpose of doing this is to hide the hacker's real IP address and therefore minimize the chance of detection. When a hacker works through several proxy servers in series, it's much harder to locate the hacker. Tracking the attacker's IP address through the logs of several proxy servers is complex and tedious work. If one of the proxy servers' log files is lost or incomplete, the chain is broken, and the hacker's IP address remains anonymous.

NeoTrace, VisualRoute, and VisualLookout

NeoTrace, VisualRoute, and VisualLookout are all packet-tracking tools with a GUI or visual interface. They plot the path the packets travel on a map and can visually identify the locations of routers and other internet working devices. These tools operate similarly to traceroute and perform the same information gathering; however, they provide a visual representation of the results.

Visualware's eMailTrackerPro

Visualware's eMailTrackerPro ( www.emailtrackerpro.com/ ) and MailTracking ( http://mailtracking.com/ ) are tools that allow an ethical hacker to track email messages. When you use these tools to send an email, forward an email, reply to an email, or modify an email, the resulting actions and tracks of the original email are logged. The sender is notified of all actions performed on the tracked email by an automatically generated email.

IPEye

IPEye is a TCP port scanner that can do SYN, FIN, Null, and XMAS scans. It's a command line tool.
IPEye probes the ports on a target system and responds with closed, reject, drop, or open. Closed means there is a computer on the other end, but it doesn't listen at the port. Reject means a firewall is rejecting the connection to the port (sending a reset back). Drop means a firewall is dropping everything to the port, or there is no computer on the other end. Open means some kind of service is listening at the port. These responses help a hacker identify what type of system is responding.

IPSecScan

IPSecScan is a tool that can scan either a single IP address or a range of addresses looking for systems that are IPSec enabled that means the system has IPSec enabled while disabled means that it either has IPSec disabled, the compatibility issue or the configuration issue that not reveal to you that it has IPSec enabled. Indeterminable means that the scanner isn't sure if IPSec is enabled or disabled.

Icmpenum

Icmpenum uses not only ICMP Echo packets to probe networks, but also ICMP Timestamp and ICMP Information packets. Furthermore, it supports spoofing and sniffing for reply packets. Icmpenum is great for scanning networks when the firewall blocks ICMP Echo packets but fails to block Timestamp or Information packets.

SNMP Scanner

SNMP Scanner allows you to scan a range or list of hosts performing ping, DNS, and Simple Network Management Protocol (SNMP) queries. This tool helps you to find out the current information about the device of SNMP nodes in the given network.

hping2 tool

The hping2 tool is notable because it contains a host of other features besides OS fingerprinting such as TCP, User Datagram Protocol (UDP), ICMP, and raw-IP ping protocols, traceroute mode, and the ability to send files between the source and target system.

THC-Scan, PhoneSweep, and TeleSweep

THC-Scan, PhoneSweep, and TeleSweep are tools that identify phone numbers and can dial a target to make a connection with a computer modem. These tools generally work by using a predetermined list of common usernames and passwords in an attempt to gain access to the system. Most remote-access dial-in connections aren't secured with a password or use very rudimentary security.

Related word

1. Hacking Wifi Kali Linux
2. Hacking To The Gate
3. Escuela Travel Hacking
4. Hackers Informaticos Contactar
5. Growth Hacking Cursos
6. Experto En Seguridad Informática
7. Growth Hacking Ejemplos
8. Elhacker Ip
9. Herramientas Hacking Android
10. Etica Hacker
11. Hacking Ethical
12. Hacking School
13. Tecnicas De Hacking
14. Fake Hacking
15. Hacking Books
16. Libros Hacking

How To Start PHP And MYSQL | The Best Server For PHP And MYSQL | Tutorial 1

Many of people want to start PHP programming embedded with MYSQL databases concepts. So i thought that I should start a series about PHP and MYSQL. So in this series of video tutorials you exactly got the content about PHP and MYSQL.

As PHP is server side scripting language. So it requires a server to get execute over the web browser. First of all you have to download and install a server that may be XAMPP, WAMPP or LAMPP. I'm using XAMPP server in the tutorials. So if you wanna follow me then download a XAMPP server. I'm using this because it has a good interface to work  and it's really simple. XAMPP is compatible with windows, MAC and Linux operating as well. WAMPP is only for windows and LAMPP is used for MAC and Linux operating system. So i prefer XAMPP for this series.

How to create Database

Step 1:

Open Your XAMPP control panel and start Apache and Mysql services.

Step 2:

Go to your Web browser and type "localhost/phpmyadmin". It will open your databases area. If you have an error then your services are not in running state. If you have any error then comment below.

Step 3:

Click over the "new" to create a new database.

Step 4:

Write Database_Name and click over the Create button. For example Facebook, Students etc.

Step 5:

Write Table_Name like admin, users etc. your can increase and decrease the size of rows. Click over Save/Create button.

Step 6:

Write your Attribute_Names in first column like Username, Email, Passwords etc. In the next data type column you have to select the data type whether it is integer or string type etc. In the next column you have to set the length of string/words.

Step 7:

If you wanna go through with a Primary_Key. Then just you have to checked the Auto_Increment box as you will shown in the video. For further watch the video for better understanding.